Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1
| Monitor runs whenever the following DTCs are not stored | C0501 (Case 2): Wheel speed sensor (FL) range/performance (2 wheels) C0501 (Case 4): Wheel speed sensor (FL) range/performance (pulse output high) C0502: Wheel speed sensor (FL) voltage circuit open C0503: Wheel speed sensor (FL) voltage circuit high C0504 (Case 1): Wheel speed sensor (FL) intermittent/erratic (moment open) C0504 (Case 2): Wheel speed sensor (FL) intermittent/erratic (a piece of metal noise) C0504 (Case 3): Wheel speed sensor (FL) intermittent/erratic (a piece of metal rotor noise) C0507 (Case 2): Wheel speed sensor (FR) range/performance (2 wheels) C0507 (Case 4): Wheel speed sensor (FR) range/performance (pulse output high) C0508: Wheel speed sensor (FR) voltage circuit open C0509: Wheel speed sensor (FR) voltage circuit high C050A (Case 1): Wheel speed sensor (FR) intermittent/erratic (moment open) C050A (Case 2): Wheel speed sensor (FR) intermittent/erratic (a piece of metal noise) C050A (Case 3): Wheel speed sensor (FR) intermittent/erratic (a piece of metal rotor noise) C050D (Case 2): Wheel speed sensor (RL) range/performance (2 wheels) C050D (Case 4): Wheel speed sensor (RL) range/performance (pulse output high) C050E: Wheel speed sensor (RL) voltage circuit open C050F: Wheel speed sensor (RL) voltage circuit high C0510 (Case 1): Wheel speed sensor (RL) intermittent/erratic (moment open) C0510 (Case 2): Wheel speed sensor (RL) intermittent/erratic (a piece of metal noise) C0510 (Case 3): Wheel speed sensor (RL) intermittent/erratic (a piece of metal rotor noise) C0513 (Case 2): Wheel speed sensor (RR) range/performance (2 wheels) C0513 (Case 4): Wheel speed sensor (RR) range/performance (pulse output high) C0514: Wheel speed sensor (RR) voltage circuit open C0515: Wheel speed sensor (RR) voltage circuit high C0516 (Case 1): Wheel speed sensor (RR) intermittent/erratic (moment open) C0516 (Case 2): Wheel speed sensor (RR) intermittent/erratic (a piece of metal noise) C0516 (Case 3): Wheel speed sensor (RR) intermittent/erratic (a piece of metal rotor noise) C137D: Brake system voltage circuit high C14E1 (Case 1): Wheel speed sensor (FL) voltage circuit low C14E1 (Case 2): Wheel speed sensor (FL) voltage circuit low (continuation) C14E4 (Case 1): Wheel speed sensor (FR) voltage circuit low C14E4 (Case 2): Wheel speed sensor (FR) voltage circuit low (continuation) C14E7 (Case 1): Wheel speed sensor (RL) voltage circuit low C14E7 (Case 2): Wheel speed sensor (RL) voltage circuit low (continuation) C14EA (Case 1): Wheel speed sensor (RR) voltage circuit low C14EA (Case 2): Wheel speed sensor (RR) voltage circuit low (continuation) |
| All of the following conditions are met | A, B, C, D, E, F, G and H |
| A. Chassis dynamometer mode | Off |
| B. Following condition is met | More than 0.012 seconds |
| IGR voltage | 3.5 V or higher |
| C. Command to all ABS hold solenoids | Off |
| D. Command to all ABS release solenoids | Off |
| E. Following condition is met | More than 0.22 seconds |
| +BS voltage | 17.4 V or less |
| F. Difference between the highest speed sensor output value and the second lowest speed sensor output value | Less than 20% of the highest speed sensor output value |
| G. The second lowest speed sensor output value | 60 Hz + 2 km/h (1.24 mph) or more |
| H. IGP voltage | Higher than 10 V |
CASE 2
| Monitor runs whenever the following DTCs are not stored | C0501 (Case 4): Wheel speed sensor (FL) range/performance (pulse output high) C0502: Wheel speed sensor (FL) voltage circuit open C0503: Wheel speed sensor (FL) voltage circuit high C0504 (Case 1): Wheel speed sensor (FL) intermittent/erratic (moment open) C0504 (Case 2): Wheel speed sensor (FL) intermittent/erratic (a piece of metal noise) C0504 (Case 3): Wheel speed sensor (FL) intermittent/erratic (a piece of metal rotor noise) C0507 (Case 4): Wheel speed sensor (FR) range/performance (pulse output high) C0508: Wheel speed sensor (FR) voltage circuit open C0509: Wheel speed sensor (FR) voltage circuit high C050A (Case 1): Wheel speed sensor (FR) intermittent/erratic (moment open) C050A (Case 2): Wheel speed sensor (FR) intermittent/erratic (a piece of metal noise) C050A (Case 3): Wheel speed sensor (FR) intermittent/erratic (a piece of metal rotor noise) C050D (Case 4): Wheel speed sensor (RL) range/performance (pulse output high) C050E: Wheel speed sensor (RL) voltage circuit open C050F: Wheel speed sensor (RL) voltage circuit high C0510 (Case 1): Wheel speed sensor (RL) intermittent/erratic (moment open) C0510 (Case 2): Wheel speed sensor (RL) intermittent/erratic (a piece of metal noise) C0510 (Case 3): Wheel speed sensor (RL) intermittent/erratic (a piece of metal rotor noise) C0513 (Case 4): Wheel speed sensor (RR) range/performance (pulse output high) C0514: Wheel speed sensor (RR) voltage circuit open C0515: Wheel speed sensor (RR) voltage circuit high C0516 (Case 1): Wheel speed sensor (RR) intermittent/erratic (moment open) C0516 (Case 2): Wheel speed sensor (RR) intermittent/erratic (a piece of metal noise) C0516 (Case 3): Wheel speed sensor (RR) intermittent/erratic (a piece of metal rotor noise) C137D: Brake system voltage circuit high C14E1 (Case 1): Wheel speed sensor (FL) voltage circuit low C14E1 (Case 2): Wheel speed sensor (FL) voltage circuit low (continuation) C14E4 (Case 1): Wheel speed sensor (FR) voltage circuit low C14E4 (Case 2): Wheel speed sensor (FR) voltage circuit low (continuation) C14E7 (Case 1): Wheel speed sensor (RL) voltage circuit low C14E7 (Case 2): Wheel speed sensor (RL) voltage circuit low (continuation) C14EA (Case 1): Wheel speed sensor (RR) voltage circuit low C14EA (Case 2): Wheel speed sensor (RR) voltage circuit low (continuation) |
| All of the following conditions are met | A, B, C, D, E, F, G, H and I |
| A. Chassis dynamometer mode | Off |
| B. Following condition is met | More than 0.012 seconds |
| IGR voltage | 3.5 V or higher |
| C. Command to all ABS hold solenoids | Off |
| D. Command to all ABS release solenoids | Off |
| E. Following condition is met | More than 0.22 seconds |
| +BS voltage | 17.4 V or less |
| F. Brake pedal operation | Off |
| G. Parking brake | Off |
| H. Difference between the highest speed sensor output value and the second highest speed sensor output value | Less than 20% of the highest speed sensor output value |
| I. The second highest speed sensor output value | 60 Hz + 2 km/h (1.24 mph) or more |
CASE 3
| Monitor runs whenever the following DTCs are not stored | C0501 (Case 1): Wheel speed sensor (FL) range/performance (correlation A) C0501 (Case 2): Wheel speed sensor (FL) range/performance (2 wheels) C0501 (Case 4): Wheel speed sensor (FL) range/performance (pulse output high) C0502: Wheel speed sensor (FL) voltage circuit open C0503: Wheel speed sensor (FL) voltage circuit high C0504 (Case 1): Wheel speed sensor (FL) intermittent/erratic (moment open) C0504 (Case 2): Wheel speed sensor (FL) intermittent/erratic (a piece of metal noise) C0504 (Case 3): Wheel speed sensor (FL) intermittent/erratic (a piece of metal rotor noise) C0507 (Case 1): Wheel speed sensor (FR) range/performance (correlation A) C0507 (Case 2): Wheel speed sensor (FR) range/performance (2 wheels) C0507 (Case 3): Wheel speed sensor (FR) range/performance (correlation B) C0507 (Case 4): Wheel speed sensor (FR) range/performance (pulse output high) C0508: Wheel speed sensor (FR) voltage circuit open C0509: Wheel speed sensor (FR) voltage circuit high C0510 (Case 1): Wheel speed sensor (RL) intermittent/erratic (moment open) C0510 (Case 2): Wheel speed sensor (RL) intermittent/erratic (a piece of metal noise) C0510 (Case 3): Wheel speed sensor (RL) intermittent/erratic (a piece of metal rotor noise) C0513 (Case 1): Wheel speed sensor (RR) range/performance (correlation A) C0513 (Case 2): Wheel speed sensor (RR) range/performance (2 wheels) C0513 (Case 3): Wheel speed sensor (RR) range/performance (correlation B) C0513 (Case 4): Wheel speed sensor (RR) range/performance (pulse output high) C0514: Wheel speed sensor (RR) voltage circuit open C0515: Wheel speed sensor (RR) voltage circuit high C0516 (Case 1): Wheel speed sensor (RR) intermittent/erratic (moment open) C0516 (Case 2): Wheel speed sensor (RR) intermittent/erratic (a piece of metal noise) C0516 (Case 3): Wheel speed sensor (RR) intermittent/erratic (a piece of metal rotor noise) C050A (Case 1): Wheel speed sensor (FR) intermittent/erratic (moment open) C050A (Case 2): Wheel speed sensor (FR) intermittent/erratic (a piece of metal noise) C050A (Case 3): Wheel speed sensor (FR) intermittent/erratic (a piece of metal rotor noise) C050D (Case 1): Wheel speed sensor (RL) range/performance (correlation A) C050D (Case 2): Wheel speed sensor (RL) range/performance (2 wheels) C050D (Case 3): Wheel speed sensor (RL) range/performance (correlation B) C050D (Case 4): Wheel speed sensor (RL) range/performance (pulse output high) C050E: Wheel speed sensor (RL) voltage circuit open C050F: Wheel speed sensor (RL) voltage circuit high C051C (Case 1): Acceleration sensor range/Performance (acceleration sensor lock) C051C (Case 2): Acceleration sensor range/Performance (GL1, GL2 lock) C051C (Case 3): Acceleration sensor range/Performance (acceleration sensor output) C051D: Acceleration sensor missing calibration C051E: Acceleration sensor intermittent/erratic C0520 (Case 1): Acceleration sensor (GL1, GL2) out of range C0520 (Case 2): Acceleration sensor GL2 out of range C0520 (Case 3): Acceleration sensor internal check C052B (Case 1 to 7): ABS pump motor performance (gate voltage) C052B (Case 8): ABS pump motor performance (motor relay current) C052B (Case 9): ABS pump motor performance (freewheeling MOS current) C052D: ABS pump motor circuit high C052E (Case 1 to 4): ABS pump motor circuit open (motor circuit) C052E (Case 5 and 6): ABS pump motor circuit open (motor relay) C053D: Master cylinder pressure sensor exceeded learning limit C0540 (Case 1): Pressure sensor lost communication C0540 (Case 2): Pressure sensor internal check C0540 (Case 3): Pressure sensor invalid data C0555: Wheel speed sensor (FL) range/performance C0556: Wheel speed sensor (FR) range/performance C0557: Wheel speed sensor (RL) range/performance C0558: Wheel speed sensor (RR) range/performance C056B: Pressure sensor intermittent/erratic C0597: ABS hold solenoid performance C05C1: Brake pedal position sensor learning not complete C1103 (Case 1): Brake pedal position sensor voltage circuit open C122E: Pressure sensor voltage circuit low C122F: Pressure sensor voltage circuit high C1240: Yaw rate and acceleration sensor incorrect C124A: Identification signal C12A7 (Case 1 and 2): ABS hold solenoid (FL) circuit open C12A7 (Case 3): ABS hold solenoid (FL) circuit low C12A8 (Case 1): ABS hold solenoid (FL) circuit high (solenoid Off current) C12A8 (Case 2 and 3): ABS hold solenoid (FL) circuit high (IC data) C12A8 (Case 4): ABS hold solenoid (FL) circuit high (solenoid On current) C12B2: ABS release solenoid (FL) circuit low C12B3: ABS release solenoid (FL) circuit high C12BD (Case 1 and 2): ABS hold solenoid (FR) circuit open C12BD (Case 3): ABS hold solenoid (FR) circuit low C12BE (Case 1): ABS hold solenoid (FR) circuit high (solenoid Off current) C12BE (Case 2 and 3): ABS hold solenoid (FR) circuit high (IC data) C12BE (Case 4): ABS hold solenoid (FR) circuit high (solenoid On current) C12C8: ABS release solenoid (FR) circuit low C12C9: ABS release solenoid (FR) circuit high C12D3 (Case 1 and 2): ABS hold solenoid (RL) circuit open C12D3 (Case 3): ABS hold solenoid (RL) circuit low C12D4 (Case 1): ABS hold solenoid (RL) circuit high (solenoid Off current) C12D4 (Case 2 and 3): ABS hold solenoid (RL) circuit high (IC data) C12D4 (Case 4): ABS hold solenoid (RL) circuit high (solenoid On current) C12DE: ABS release solenoid (RL) circuit low C12DF: ABS release solenoid (RL) circuit high C12E9 (Case 1 and 2): ABS hold solenoid (RR) circuit open C12E9 (Case 3): ABS hold solenoid (RR) circuit low C12EA (Case 1): ABS hold solenoid (RR) circuit high (solenoid Off current) C12EA (Case 2 and 3): ABS hold solenoid (RR) circuit high (IC data) C12EA (Case 4): ABS hold solenoid (RR) circuit high (solenoid On current) C12F4: ABS release solenoid (RR) circuit low C12F5: ABS release solenoid (RR) circuit high C12F6: ABS hold solenoid other functional C12F7: ABS hold solenoid other functional C13BF: SM solenoid other functional C13C2 (Case 1 and 2): SM1 solenoid circuit open C13C2 (Case 3): SM1 solenoid circuit low C13C3 (Case 1): SM1 solenoid circuit high (solenoid Off current) C13C3 (Case 2 and 3): SM1 solenoid circuit high (IC data) C13C3 (Case 4): SM1 solenoid circuit high (solenoid On current) C13CB (Case 1 and 2): SM2 solenoid circuit open C13CB (Case 3): SM2 solenoid circuit low C13CC (Case 1): SM2 solenoid circuit high (solenoid Off current) C13CC (Case 2 and 3): SM2 solenoid circuit high (IC data) C13CC (Case 4): SM2 solenoid circuit high (solenoid On current) C137D: Brake system voltage circuit high C1427: ABS pump motor stuck C143B: Brake system voltage power supply relay circuit high C143C: Brake system voltage power supply relay circuit open C14E1 (Case 1): Wheel speed sensor (FL) voltage circuit low C14E1 (Case 2): Wheel speed sensor (FL) voltage circuit low (continuation) C14E4 (Case 1): Wheel speed sensor (FR) voltage circuit low C14E4 (Case 2): Wheel speed sensor (FR) voltage circuit low (continuation) C14E7 (Case 1): Wheel speed sensor (RL) voltage circuit low C14E7 (Case 2): Wheel speed sensor (RL) voltage circuit low (continuation) C14EA (Case 1): Wheel speed sensor (RR) voltage circuit low C14EA (Case 2): Wheel speed sensor (RR) voltage circuit low (continuation) P05DB: Brake pedal position sensor invalid data P05DD: Brake pedal position sensor circuit open P05DE: Brake pedal position sensor circuit high P05DF: Brake pedal position sensor intermittent/erratic P05E0: Brake pedal position sensor "A"/"B" correlation U0125: Lost communication with multi-axis acceleration sensor module |
| All of the following conditions are met | A, B, C, D, E, F, G, H and I |
| A. Chassis dynamometer mode | Off |
| B. Following condition is met | More than 0.012 seconds |
| IGR voltage | 3.5 V or higher |
| C. Command to all ABS hold solenoids | Off |
| D. Command to all ABS release solenoids | Off |
| E. Following condition is met | More than 0.22 seconds |
| +BS voltage | 17.4 V or less |
| F. Brake pedal operation | Off |
| G. Parking brake | Off |
| H. Difference between the highest speed sensor output value and the second lowest speed sensor output value | Less than 2 km/h (1.24 mph) |
| I. BM voltage | 6 V or higher |