LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Emission Control System (2GR-FXS) - Service Information) >> Fuel Vapor Containment Valve >> Inspection [12/2023 - ] >> Procedure

Inspection [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID WITH HOSE VALVE ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1231455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fuel Vapor Containment Valve (Fuel Tank Solenoid with Hose Valve Assembly))

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      1 (CCV) - 2 (+B) 20°C (68°F) 25 to 30 Ω Ω
      1. If the result is not as specified, replace the fuel vapor containment valve (fuel tank solenoid with hose valve assembly).