LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Fuel System (2GR-FXS) - Service Information) >> Fuel Pump Ecu >> Installation [12/2023 - ] >> Procedure

Installation [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP CONTROL ECU BRACKET 

    Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

  2. INSTALL FUEL PUMP CONTROL ECU 

    Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH 
  4. INSTALL ROPE HOOK ASSEMBLY 
  5. INSTALL ROPE HOOK 
  6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK 
  7. INSTALL DECK TRIM POCKET COVER 
  8. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH 

    Refer to PROCEDURE - Step 9

  9. INSTALL DECK SIDE TRIM COVER LH 
  10. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH 

    Refer to PROCEDURE - Step 11

  11. INSTALL CENTER PILLAR LOWER GARNISH BELT HOLE COVER LH 
  12. INSTALL REAR FLOOR FINISH PLATE 
  13. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH 
  14. INSTALL REAR DOOR SCUFF PLATE LH 
  15. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH 
  16. INSTALL REAR NO. 2 SEAT ASSEMBLY 

    Refer to INSTALLATION [12/2023 - ]

scientia non olet · About LEMON Manuals