Installation [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY (FUEL PRESSURE SENSOR)

NOTE:

Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly.
If the fuel pressure sensor is removed, replace the fuel delivery pipe with sensor assembly (fuel pressure sensor) with a new one.

Refer to INSTALLATION [12/2023 - ]

PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing a fuel delivery pipe with sensor assembly (fuel pressure sensor).
  Refer to INITIALIZATION [12/2023 - ]