LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Fuel System (2GR-FXS) - Service Information) >> FUEL PUMP (for High Pressure) >> Inspection [12/2023 - ] >> Procedure

Inspection [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL (ENGINE ROOM SIDE) PUMP ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 0.45 to 0.55 Ω

      If the result is not as specified, replace the fuel (engine room side) pump assembly.

      GTY624186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fuel (Engine Room Side) Pump Assembly)
scientia non olet · About LEMON Manuals