Removal [12/2023 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH (FUEL PRESSURE SENSOR) NOTE:
- Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly LH.
- If the fuel pressure sensor is removed, replace the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) with a new one.
Refer to REMOVAL [12/2023 - ]
- REMOVE FUEL PIPE PLUG SUB-ASSEMBLY
- Secure the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) in a vise between aluminum plates.NOTE:
Do not overtighten the vise.
- Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe with sensor assembly LH (fuel pressure sensor).
- Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly.
- Remove the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) from the vise.
- Secure the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) in a vise between aluminum plates.