LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Control System - Diagnostic Codes (3 Of 6)) >> SFI System >> DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal; DTC P0390-31: Camshaft Position Sensor "B" Bank 2 No Signal [12/2023 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
P0365: VERIFY PULSE INPUT

All of the following conditions are met -
Auxiliary battery voltage 8 V or higher
Ignition switch ON
Exhaust VVT sensor range check fail (P0367, P0368) Not detected
Exhaust VVT sensor voltage 0.3 to 4.7 V
Engine speed 600 rpm or higher
Hybrid control module judge Engine running
Lost communication with hybrid control module (U0293) Not detected
P0390: VERIFY PULSE INPUT

All of the following conditions are met -
Auxiliary battery voltage 8 V or higher
Ignition switch ON
Exhaust VVT sensor range check fail (P0392, P0393) Not detected
Exhaust VVT sensor voltage 0.3 to 4.7 V
Engine speed 600 rpm or higher
Hybrid control module judge Engine running
Lost communication with hybrid control module (U0293) Not detected