Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Time after engine start |
5 seconds or more |
| Command to injector driver relay |
On |
| Output duty cycle |
5 to 95% |
| Auxiliary battery voltage |
10.5 V or higher |
| Ignition switch |
ON |
| Engine |
Running |