LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System - Diagnostic Codes (4 Of 6)) >> SFI System >> DTC P0630-51: VIN Not Programmed [12/2023 - ] >> Procedure

DTC P0630-51: VIN Not Programmed [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630-51) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      NOTE:

      If P0630-51 is output, the VIN must be written to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN is written. If DTCs other than P0630-51 are output, troubleshoot them first.

      Result

      Result Proceed to
      P0630-51 and other DTCs are output A
      P0630-51 is output B

    Result: 

    GO TO DTC CHART. Refer To  DIAGNOSTIC TROUBLE CODE CHART [12/2023 - ] 

    Result: 

    See step  2

  2. INPUT VIN 
    1. Input the VIN.

      Refer to REGISTRATION [12/2023 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END