DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1; DTC P0012-00: Camshaft Position "A" - Timing Over-Retarded Bank 1; DTC P0021-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2; DTC P0022-00: Camshaft Position "A" - Timing Over-Retarded Bank 2 [12/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-13.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	DTC Output from	Priority	Note
P0011-00	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1	Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for intake camshaft of bank 1) Camshaft timing oil control valve assembly (for intake camshaft of bank 1) [camshaft timing gear bolt] Camshaft timing gear assembly (bank 1) Oil control valve filter (bank 1) ECM	Comes on	Engine	B	SAE Code: P0011
P0012-00	Camshaft Position "A" - Timing Over-Retarded Bank 1	Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for intake camshaft of bank 1) Camshaft timing oil control valve assembly (for intake camshaft of bank 1) [camshaft timing gear bolt] Camshaft timing gear assembly (bank 1) Oil control valve filter (bank 1) ECM	Comes on	Engine	B	SAE Code: P0012
P0021-00	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2	Intake valve timing is stuck at a certain value when in the advance range (1 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for intake camshaft of bank 2) Camshaft timing oil control valve assembly (for intake camshaft of bank 2) [camshaft timing gear bolt] Camshaft timing gear assembly (bank 2) Oil control valve filter (bank 2) ECM	Comes on	Engine	B	SAE Code: P0021
P0022-00	Camshaft Position "A" - Timing Over-Retarded Bank 2	Intake valve timing is stuck at a certain value when in the retard range (2 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for intake camshaft of bank 2) Camshaft timing oil control valve assembly (for intake camshaft of bank 2) [camshaft timing gear bolt] Camshaft timing gear assembly (bank 2) Oil control valve filter (bank 2) ECM	Comes on	Engine	B	SAE Code: P0022