Inspection [12/2023 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition Result 2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω Ω *a Component without harness connected
(Throttle Body with Motor Assembly)If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.