LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Hybrid Control System - Diagnostic Codes (6 Of 6) & Circuit Tests) >> HYBRID CONTROL SYSTEM (for PHEV Model) >> Pattern Select Switch EV Mode Circuit [12/2023 - ] >> Description

Pattern Select Switch EV Mode Circuit [12/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.

The EV mode signal will be sent to the hybrid vehicle control ECU assembly when the EV/HV AUTO mode switch (electric parking brake switchassembly) is operated. If the specified conditions are met, the system enters EV mode and the vehicle will be driven using EV mode. This signal is then transmitted from the hybrid vehicle control ECU assembly via CAN to the combination meter assembly to illuminate the EV/HV AUTO mode indicator.

scientia non olet · About LEMON Manuals