LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Hybrid Battery Control System - Service Information (2 Of 3)) >> Accelerator Pedal Sensor >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ACCELERATOR PEDAL COVER 
    1. GTY1199977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    NOTE:
    • Avoid physical shock to the accelerator pedal (with sensor) rod assembly.
    • If the accelerator pedal (with sensor) rod assembly has been struck or dropped, replace it.
    • Do not disassemble the accelerator pedal (with sensor) rod assembly.
    • The accelerator pedal (with sensor) rod assembly does not require lubrication.
    • Do not apply oil or other lubricants to the accelerator pedal (with sensor) rod assembly. If applied, the accelerator pedal (with sensor) rod assembly must be replaced.
    1. GTY1194898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals