Installation [09/2023 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SERVICE PLUG GRIP WARNING:
Be sure to wear insulated gloves.
NOTE:Before installing the service plug grip, check that no parts or tools remain and that the high voltage terminals and connectors are connected securely.
- While wearing insulated gloves, and temporarily install the service plug grip as indicated by the arrow (1) shown in the illustration.
- Rotate the handle of the service plug grip 90° toward the HV battery and slide it in the direction indicated by the arrow (3) shown in the illustration until a click sound is heard to install the service plug grip.
- INSTALL HYBRID BATTERY SERVICE PLUG COVER
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to INSTALLATION [09/2023 - ]
- INSTALL BATTERY SERVICE HOLE COVER
Refer to PROCEDURE - Step 7
- INSTALL DECK BOARD ASSEMBLY
- INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.