LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Hybrid Battery Control System - Service Information (3 Of 3)) >> REFRIGERANT LINE (for PHEV Model) >> Airtight Inspection [12/2023 - ] >> Procedure

Airtight Inspection [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT REFRIGERANT LEAK 
    1. Sufficiently apply compressor oil to 2 SST O-rings.
      GTY1002032Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09893-1006009893-10070 

      Compressor Oil

      ND-OIL 11 or equivalent

      NOTE:

      Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is used, compressor motor insulation performance may decrease, resulting in leakage of electric power.

    2. Install the SST with the 2 bolts.
      GTY1002580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 9.8 N.m (100 kgf/cm, 7 ft.lbf) 

    3. Connect a refrigerant recovery unit to the SST.
      GTY1001581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the refrigerant recovery unit in accordance with the manufacturer's instruction manual.

    4. Perform vacuum drawing.

      OK

      Can maintain the vacuum state for more than 5 minutes.