Inspection [12/2023 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT NO. 2 MAGNET VALVE ASSEMBLY
- Connect the auxiliary battery positive (+) lead to terminal 2 of the No. 2 magnet valve assembly connector and the auxiliary battery negative (-) lead to terminal 1. Then check that the No. 2 magnet valve assembly operates.
OK
Apply compressed air to the air inlet and check that air not comes out from the air outlet.
*a Component without harness connected
(No. 2 Magnet Valve Assembly)- If the result is not as specified, replace the No. 2 magnet valve assembly.
- Connect the auxiliary battery positive (+) lead to terminal 2 of the No. 2 magnet valve assembly connector and the auxiliary battery negative (-) lead to terminal 1. Then check that the No. 2 magnet valve assembly operates.