Caution / Notice / Hint

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Junction Block (For PHEV Model) Installation Components With Torque Specifications (1 Of 4)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
1	NO. 1 JUNCTION BLOCK ASSEMBLY	82670A	-	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf)

Fig 2: Junction Block (For PHEV Model) Installation Components With Torque Specifications (2 Of 4)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
2	FLOOR UNDER WIRE	821H1	See step 2	-	-
3	NO. 3 HIGH VOLTAGE FLOOR UNDER WIRE	-	See step 3	-	-
4	JUNCTION BLOCK COVER	82672A	See step 4	-	-

*1	FLOOR WIRE	*2	WIRING HARNESS CLAMP BRACKET
*3	NO. 3 CONSOLE BOX MOUNTING BRACKET	*4	FRONT FLOOR CARPET ASSEMBLY
*5	NO. 1 REAR FLOOR SILENCER	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	-	-

Fig 3: Junction Block (For PHEV Model) Installation Components (3 Of 4)

Procedure		Part Name Code
5	REAR CONSOLE BOX ASSEMBLY	58910C	-	-	-
6	REAR NO. 2 SEAT ASSEMBLY	-	-	-	-
7	REAR NO. 1 SEAT ASSEMBLY	-	-	-	-

Fig 4: Junction Block (For PHEV Model) Installation Components (4 Of 4)

Procedure		Part Name Code
8	SERVICE PLUG GRIP	G3834	-	-	-