LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Hybrid Battery Control System - Service Information (3 Of 3)) >> HV Relay Assembly >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 TRACTION BATTERY DEVICE BOX 

    Refer to REMOVAL [09/2023 - ] 

  2. REMOVE NO. 1 TRACTION BATTERY DEVICE BOX 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    NOTE:
    • Insulate the disconnected high-voltage connector with insulating tape.
    • If the No. 1 traction battery device box has been struck or dropped, replace it with a new one.
    1. GTY1131411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Nut Connector