LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Hybrid Battery Control System - Service Information (3 Of 3)) >> HV Relay Assembly >> Installation [09/2023 - ] >> Procedure

Installation [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 TRACTION BATTERY DEVICE BOX 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    NOTE:
    • If the No. 1 traction battery device box has been struck or dropped, replace it with a new one.
    • Make sure that the connectors are connected securely.

    Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

  2. INSTALL NO. 2 TRACTION BATTERY DEVICE BOX 

    Refer to INSTALLATION [09/2023 - ]