Inspection [12/2023 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HV SUPPLY STACK SUB-ASSEMBLY WARNING:
Be sure to wear insulated gloves and protective goggles.
- Remove the HV supply stack sub-assembly.
HINT:
Refer to REMOVAL [12/2023 - ]
- Inspect the HV supply stack sub-assembly.
- Check that no electrolyte is leaking from the HV supply stack sub-assembly.
*1 No. 1 HV Supply Stack Sub-assembly *2 No. 2 HV Supply Stack Sub-assembly *3 No. 3 HV Supply Stack Sub-assembly *4 No. 4 HV Supply Stack Sub-assembly *a Check Part - - OK
There is no electrolyte leaking from the HV supply stack sub-assembly.
HINT:
If the result is not as specified, replace the HV supply stack sub-assembly.
- Check that no electrolyte is leaking from the HV supply stack sub-assembly.
- Install the HV supply stack sub-assembly.
HINT:
Refer to INSTALLATION [12/2023 - ]
- Remove the HV supply stack sub-assembly.