LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Hybrid Battery Control System - Service Information (3 Of 3)) >> ELECTRIC EXPANSION VALVE (BATTERY COOLING) (for PHEV Model) >> Removal [12/2023 - ] >> Procedure

Removal [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 TRACTION BATTERY DEVICE BOX ASSEMBLY 

    Refer to REMOVAL [12/2023 - ]

  2. REMOVE NO. 2 TRACTION BATTERY COOLER TUBE 
    See step  2
  3. REMOVE NO. 1 TRACTION BATTERY COOLER TUBE 
    See step  3
  4. REMOVE NO. 1 AIR CONDITIONING THERMISTOR ASSEMBLY 
    See step  6
  5. REMOVE NO. 4 LIQUID TUBE 
    See step  7
  6. REMOVE NO. 3 MAGNET VALVE ASSEMBLY 
    1. GTY1080390Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1079171Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the O-ring from the No. 2 liquid tube.
        NOTE:

        Seal the openings of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE NO. 3 LIQUID TUBE 
    See step  9
  8. REMOVE NO. 1 MAGNET VALVE ASSEMBLY 
    1. GTY1079084Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a 5 mm socket hexagon wrench, remove the bolt, No. 2 magnet valve assembly and No. 1 liquid tube from the No. 2 liquid tube.
    2. GTY1080391Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. GTY1079271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 O-rings from the No. 2 liquid tube.
        NOTE:

        Seal the openings of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.

scientia non olet · About LEMON Manuals