Removal [12/2023 - ]: Procedure

Refer to REMOVAL [12/2023 - ]

See step  2

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Turn

   -

   -

   1. Secure the air conditioning pressure sensor in a vise between aluminum plates.
      NOTE:

      • When using a vise, place aluminum plates between the part and vise.
      • When using a vise, do not overtighten it.
      • Do not damage the sealant or brazed area at the base of the piping.

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        *1	Air Conditioning Pressure Sensor
        *2	Sealant or Brazed Area

   2. Using a 27 mm deep socket wrench, remove the air conditioning pressure sensor as shown in the illustration.
      NOTE:

      • Do not apply excessive force to the pipe.
      • Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Remove the O-ring from the air conditioning pressure sensor.
      NOTE:

      Seal the openings of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.