Caution / Notice / Hint
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to the precautions before inspecting high voltage circuit.
Refer to PRECAUTION [12/2023 - ]
NOTE:
- If the DTCs are cleared or the cable is disconnected and reconnected to the negative (-) auxiliary battery terminal before performing repairs, turning the ignition switch ON (READY) may cause a malfunction. Do not turn the ignition switch ON (READY).
- Do not turn the ignition switch ON with the service plug grip removed, as this may cause a malfunction.
- If DTC P0AA0-73 is output, do not install the service plug grip before completing repair.
If the service plug grip is not removed, the HV battery will gradually discharge and the SOC will decrease.
HINT:
If DTC P0AA0-73 is output, the ignition switch cannot be turned ON (READY).