DTC U111A-87: Lost Communication with ECM/PCM "A" (ch2) Missing Message; DTC U111A-00: Lost Communication with ECM/PCM "A" (ch2); DTC U1150-00: Lost Communication with Hybrid Powertrain Control Module (ch2); DTC U1150-87: Lost Communication with Hybrid/EV Powertrain Control Module (ch2) Missing Message; DTC U1159-87: Lost Communication with Electronic Brake Booster Control Module "A" (ch3) Missing Message; DTC U1170-87: Lost Communication with Brake System Control Module (ch2) Missing Message; DTC U11B7-00: Lost Communication with TCM (ch4) (System 2) Missing Message; DTC U11B7-87: Lost Communication with TCM (ch4) Missing Message; DTC U11BC-87: Lost Communication with Hybrid/EV Powertrain Control Module (ch6) Missing Message; DTC U11BE-87: Lost Communication with ECM/PCM "A" (ch7) Missing Message [09/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| U111A-00 | Lost Communication with ECM/PCM "A" (ch2) | Communication stops between the hybrid vehicle control ECU assembly and the ECM. |
|
DTC Output from
|
| U111A-87 | Lost Communication with ECM/PCM "A" (ch2) Missing Message | Communication stops between the No. 2 skid control ECU (brake actuator assembly) or hybrid vehicle control ECU assembly and the ECM. |
|
DTC Output from
|
| U1150-00 | Lost Communication with Hybrid Powertrain Control Module (ch2) | Communication stops between the No. 1 skid control ECU (brake booster with master cylinder assembly) and the hybrid vehicle control ECU assembly. |
|
DTC Output from
|
| U1150-87 | Lost Communication with Hybrid/EV Powertrain Control Module (ch2) Missing Message | Communication stops between the ECM, TCM or No. 2 skid control ECU (brake actuator assembly) and the hybrid vehicle control ECU assembly. |
|
DTC Output from
|
| U1159-87 | Lost Communication with Electronic Brake Booster Control Module "A" (ch3) Missing Message | Communication stops between the No. 2 skid control ECU (brake actuator assembly) and the No. 1 skid control ECU (brake booster with master cylinder assembly). |
|
DTC Output from
|
| U1170-87 | Lost Communication with Brake System Control Module (ch2) Missing Message | Communication stops between the hybrid vehicle control ECU assembly or TCM and the No. 2 skid control ECU (brake actuator assembly). |
|
DTC Output from
|
| U11B7-00 | Lost Communication with TCM (ch4) (System 2) Missing Message | Communication stops between the hybrid vehicle control ECU assembly and the TCM. |
|
DTC Output from
|
| U11B7-87 | Lost Communication with TCM (ch4) Missing Message | Communication stops between the hybrid vehicle control ECU assembly and the TCM. |
|
DTC Output from
|
| U11BC-87 | Lost Communication with Hybrid/EV Powertrain Control Module (ch6) Missing Message | Communication stops between the hybrid vehicle control ECU assembly and the No. 2 skid control ECU (brake actuator assembly). |
|
DTC Output from
|
| U11BE-87 | Lost Communication with ECM/PCM "A" (ch7) Missing Message | Communication stops between the TCM and the ECM. |
|
DTC Output from
|