DTC P0500-31: Vehicle Speed Sensor "A" No Signal [09/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
The skid control ECU converts the vehicle speed pulse signals output from the speed sensors installed to each wheel into vehicle speed signals. It then inputs these signals to the ECM as speed signals via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|
| P0500-31 | Vehicle Speed Sensor "A" No Signal | The SP1 vehicle speed signal from the skid control ECU is 0 km/h (0 mph) or less while driving (2 trip detection logic). |
|
Comes on | Engine | B |
|