DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [09/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0335-11.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	DTC Output from	Priority	Note
P0335-2A	Crankshaft Position Sensor "A" Signal Stuck in Range	No crankshaft position sensor signal to the ECM while cranking (1 trip detection logic).	Open or short in crankshaft position sensor circuit Crankshaft position sensor No. 1 crankshaft position sensor plate ECM	Comes on	Engine	A	SAE Code: P0335 DTC for Mexico Models: Applies
P0335-31	Crankshaft Position Sensor "A" No Signal	The engine stalls and the engine speed signal value decreases rapidly (1 trip detection logic).	Open or short in crankshaft position sensor circuit Crankshaft position sensor No. 1 crankshaft position sensor plate ECM	Comes on	Engine	A	SAE Code: P0335 DTC for Mexico Models: Applies

Reference: Inspection using an oscilloscope.
Refer to DESCRIPTION