LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine Control System - Diagnostic Codes (1 Of 7)) >> SFI SYSTEM (for 1Motor-HEV Model) >> DTC P0105-2A: Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range [09/2023 - ] >> Description

DTC P0105-2A: Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range [09/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0105-11.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Priority Note
P0105-2A Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range Intake manifold pressure measured after engine start drops by less than 3 kPa [0.4 psi] compared to the intake manifold pressure (atmospheric pressure) measured before engine start (2 trip detection logic).
  • Intake system
  • No. 1 turbo pressure sensor
Comes on Engine B
  • SAE Code: P0106
  • DTC for Mexico Models: Does not apply