LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (T24A-FTS) - Service Information >> Oil Pan And Oil Level Sensor >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

  1. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 
    1. GTY1199640Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 
    For 1Motor-HEV Model:
    Refer to PROCEDURE - Step 57
    For Gasoline Model:
    Refer to PROCEDURE - Step 57
  4. REMOVE ENGINE OIL LEVEL SENSOR 
    1. GTY1075711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the engine oil level sensor connector.
      2. Remove the clip from the engine oil level sensor.
      3. Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from engine balancer assembly.
scientia non olet · About LEMON Manuals