Installation [09/2023 - ]: Procedure

1. Fig 1: Oil Cooler Assembly Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Install the oil cooler assembly with the 4 bolts in several steps in the order shown in the illustration.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Install the exhaust pipe heat insulator with the 2 bolts.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

      NOTE:

      Make sure that the exhaust pipe heat insulator do not contact the oil cooler assembly.

For 1Motor-HEV Model:

Refer to INSTALLATION [09/2023 - ]

For Gasoline Model:

Refer to INSTALLATION [09/2023 - ]