LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (T24A-FTS) - Service Information >> COOLANT (for Engine) >> Replacement [09/2023 - ] >> Procedure

Replacement [09/2023 - ]: Procedure

  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 

    For 1Motor-HEV Model: Refer to PROCEDURE - Step 7

    For Gasoline Model: Refer to PROCEDURE - Step 8

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 

    For 1Motor-HEV Mode: Refer to PROCEDURE - Step 8

    For Gasoline Model: Refer to PROCEDURE - Step 9

  3. REMOVE NO. 1 ENGINE UNDER COVER 

    For 1Motor-HEV Model: Refer to PROCEDURE - Step 9

    For Gasoline Model: Refer to PROCEDURE - Step 10

  4. REMOVE SUSPENSION TOWER DAMPER (w/ Suspension Tower Damper) 

    Refer to PROCEDURE - Step 4 [09/2023 - 12/2023] , or refer to PROCEDURE - Step 4 [12/2023 - ]

  5. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 5

  6. ADD ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 6

  7. INSPECT FOR COOLANT LEAK (for Engine) 

    Refer to PROCEDURE - Step 1

  8. INSTALL SUSPENSION TOWER DAMPER (w/ Suspension Tower Damper) 

    Refer to PROCEDURE - Step 1 [09/2023 - 12/2023] , or refer to PROCEDURE - Step 1 [12/2023 - ]

  9. INSTALL NO. 1 ENGINE UNDER COVER 

    For 1Motor-HEV Model: Refer to PROCEDURE - Step 82

    For Gasoline Model: Refer to PROCEDURE - Step 91

  10. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH 
  11. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH 
scientia non olet · About LEMON Manuals