Removal [09/2023 - 12/2023]: Procedure

REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
1. for PC60:
  Refer to REMOVAL [09/2023 - ]
2. for UA81E / UA81F:
  Refer to REMOVAL [09/2023 - ]
REMOVE LOWER NO. 2 INSTRUMENT PANEL PAD SUB-ASSEMBLY
Refer to PROCEDURE - Step 3
REMOVE UPPER CONSOLE COVER

Refer to PROCEDURE - Step 7
REMOVE INSTRUMENT PANEL BOX SUB-ASSEMBLY
Refer to PROCEDURE - Step 8

REMOVE STEREO JACK ADAPTER ASSEMBLY

Disconnect the connector.
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the stereo jack adapter assembly.