LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Advanced Driver Assistance System - Service Information >> Millimeter Wave Radar Sensor >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

  1. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    HINT: 

    The illustrations are representative examples, and details may differ.

    1. GTY1230523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Wire Harness - -
      *a Bolt *b Screw