LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System (T24A-FTS) - Service Information (1 Of 4) >> CYLINDER HEAD GASKET (for 1Motor-HEV Model) >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

  1. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY 

    Refer to REMOVAL [09/2023 - ] 

  2. REMOVE DRIVE SHAFT BEARING BRACKET 

    Refer to PROCEDURE - Step 1

  3. DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE 

    Refer to PROCEDURE - Step 13

  4. DISCONNECT NO. 3 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 14

  5. DISCONNECT NO. 4 TURBO WATER HOSE 

    Refer to PROCEDURE - Step 16

  6. DISCONNECT NO. 4 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 18

  7. DISCONNECT NO. 5 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 19

  8. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE 
    Refer to PROCEDURE - Step 12
  9. REMOVE INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY 

    Refer to PROCEDURE - Step 21

  10. REMOVE WATER CONTROL VALVE 

    Refer to PROCEDURE - Step 11

  11. REMOVE FRONT WATER BY-PASS JOINT 

    Refer to PROCEDURE - Step 15

  12. REMOVE WATER OUTLET GASKET 

    Refer to PROCEDURE - Step 16

  13. REMOVE MANIFOLD STAY 

    Refer to PROCEDURE - Step 22

  14. REMOVE NO. 1 WIRING HARNESS HEAT INSULATOR 

    Refer to PROCEDURE - Step 22

  15. REMOVE NO. 1 TURBO OIL PIPE 

    Refer to PROCEDURE - Step 29

  16. REMOVE NO. 1 TURBO OIL OUTLET GASKET 

    Refer to PROCEDURE - Step 30

  17. REMOVE TURBOCHARGER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31

  18. REMOVE FUEL TUBE SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 34
  19. REMOVE FUEL DELIVERY PIPE 
    Refer to PROCEDURE - Step 17
  20. REMOVE FUEL DELIVERY SPACER 

    Refer to PROCEDURE - Step 18

  21. REMOVE INJECTOR VIBRATION INSULATOR 

    Refer to PROCEDURE - Step 19

  22. REMOVE NO. 5 ENGINE WIRE 

    Refer to PROCEDURE - Step 20

  23. REMOVE PORT FUEL INJECTOR ASSEMBLY 
    Refer to PROCEDURE - Step 21
  24. REMOVE SENSOR WIRE 
    Refer to PROCEDURE - Step 47
  25. REMOVE NO. 1 WATER HOSE CLAMP BRACKET 

    Refer to PROCEDURE - Step 48

  26. REMOVE WATER INLET HOUSING 

    Refer to PROCEDURE - Step 49

  27. REMOVE NO. 2 MANIFOLD STAY 

    Refer to PROCEDURE - Step 23

  28. REMOVE WIRE HARNESS CLAMP BRACKET 

    Refer to PROCEDURE - Step 54

  29. REMOVE SPARK PLUG 
    Refer to PROCEDURE - Step 5
  30. REMOVE OIL COOLER ASSEMBLY 

    Refer to PROCEDURE - Step 4

  31. REMOVE OIL COOLER GASKET 

    Refer to PROCEDURE - Step 5

  32. REMOVE OIL COOLER PIPE GASKET 

    Refer to PROCEDURE - Step 6

  33. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 49

  34. REMOVE VALVE LASH ADJUSTER ASSEMBLY 

    Refer to PROCEDURE - Step 50

  35. REMOVE VALVE STEM CAP 

    Refer to PROCEDURE - Step 51

  36. REMOVE CYLINDER HEAD SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 52
  37. REMOVE CYLINDER HEAD GASKET 
    1. GTY1077730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  38. INSPECT CYLINDER HEAD SET BOLT 

    Refer to PROCEDURE - Step 21

  39. INSPECT CYLINDER HEAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

scientia non olet · About LEMON Manuals