Removal [10/2022 - 08/2023]: Procedure

• After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

  Refer to BEFORE DISCONNECTING BATTERY [10/2022 - ]

• When replacing the auxiliary battery, use a new auxiliary battery of the same dimensions and same capacity or more from the same class at a 20-hour rate.
• After replacing the auxiliary battery, install the ventilation hole plug supplied with the new auxiliary battery or the ventilation hole plug from the old auxiliary battery to the ventilation hole on the side to which the battery hose is not connected.

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to WORK PROCEDURE [10/2022 - ]