Customize Parameters [10/2022 - ]
WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE AIR CONDITIONING SYSTEM
- Customizing with the GTS.NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Select the setting by referring to the table below.
Air Conditioner
Tester Display Description Default Setting ECU Foot/DEF Auto Mode Function to turn the air flow from Foot/DEF ON automatically when AUTO MODE is ON. $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly Efficient Ventilation Mode Function to automatically change ambient air induction and room circulation is set.* $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly ECO Mode Control This function switches ON/OFF of the controlling function of the air conditioning by ECO mode. If there is no ECO MODE switch, this customize function is not available. $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly Outside Air Mode Auto Switch Function This function switches ON/OFF of the function to switch the suction opening to the outside air mode automatically at the time of the ignition switch off. $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly Set Temperature Shift Function to control with the shifted temperature against the display temperature. $00:Normal $05:-2C,$06:-1C,$00:Normal,$01:+1C,$02:+2C Air conditioning amplifier assembly Refrigerant Shortage Check Function to cancel the refrigerant shortage check when item is OFF. (The verification mode is excluded.) $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly S-FLOW Control Auto Function When ignition switch is turned to ON, ON/OFF of the function to operate in the S-FLOW Control Auto is switched. $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly A/C Auto Switch Mode Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.* $01:ON $00:OFF,$01:ON Air conditioning amplifier assembly Emission Gas Sensitivity Adjustment Function to change the sensitivity of the exhaust gas sensor.* $00:0 $04:-3,$05:-2,$06:-1,$00:0,$01:+1,$02:+2,$03:+3,$07:Disable Air conditioning amplifier assembly - *: Customize settings may not be able to be selected from "Air Conditioner" if the vehicle recognizes driver 1, 2 or 3 with the My Settings function. In that case, change the settings from "My Settings".
Refer to CUSTOMIZE PARAMETERS [10/2022 - ]
- *: Customize settings may not be able to be selected from "Air Conditioner" if the vehicle recognizes driver 1, 2 or 3 with the My Settings function. In that case, change the settings from "My Settings".
- Customizing with the center display.
- Turn the ignition switch to ON.
- Enter the following menus: Settings → Vehicle customize → Climate.CLIMATE SETTINGS
Function Default Setting ECU Switching between outside air and recirculated air mode linked to "AUTO" switch operation* On On or Off Air conditioning amplifier assembly A/C auto switch operation* On On or Off Air conditioning amplifier assembly Exhaust gas sensor sensitivity* Standard -3 / -2 / -1 / Standard / +1 / +2 / +3 / OFF Air conditioning amplifier assembly *: This setting changes in accordance with My Settings
- Customizing with the GTS.