DTC P2611-12: A/C Low Pressure Magnetic Valve Circuit Short to Battery [08/2023 - ]: Description
The low pressure magnetic valve (No. 1 magnet valve assembly) is installed to the No. 2 air conditioner tube and accessory assembly and is open when the ignition switch is turned off. When the ignition switch is turned to ON, the low pressure magnetic valve (No. 1 magnet valve assembly) opens and closes according to heat pump air conditioning control. When heat pump air conditioning control is performing cooling/serial dehumidification heating/cooling battery cooling/single battery cooling/, the low pressure magnetic valve (No. 1 magnet valve assembly) is closed according to signals from the heat pump ECU assembly. When heat pump air conditioning control is performing heating/parallel dehumidification heating/defrosting, the low pressure magnetic valve (No. 1 magnet valve assembly) is open.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P2611-12 | A/C Low Pressure Magnetic Valve Circuit Short to Battery | Diagnosis Condition:
Malfunction Status:
Detection Time:
Trip:
|
|
Come on | Memorized | Air Conditioner | A | SAE Code:
|