DTC P2E00-64: Gear Lever Position Sensor "A" Signal Plausibility Failure; DTC P2E04-64: Gear Lever Position Sensor "B" Signal Plausibility Failure; DTC P2E08-64: Gear Lever Position Sensor "C" Signal Plausibility Failure [10/2022 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The shift control ECU and 3 shift sensors are built into the transmission floor shift assembly. The shift control ECU monitors the angle information of the shift sensors and power supply voltage for sensors.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P2E00-64 | Gear Lever Position Sensor "A" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E01 |
| P2E04-64 | Gear Lever Position Sensor "B" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E05 |
| P2E08-64 | Gear Lever Position Sensor "C" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E09 |