LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P18B5-62: Gear Shift Actuator "A" Phase U-V-W Current Sensor Signal Compare Failure [10/2022 - ] >> Description

DTC P18B5-62: Gear Shift Actuator "A" Phase U-V-W Current Sensor Signal Compare Failure [10/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the hybrid vehicle control ECU stores a DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P18B5-62 Gear Shift Actuator "A" Phase U-V-W Current Sensor Signal Compare Failure When the BAT1 terminal voltage is a certain value or more, the total value of the actuator motor current sensor for phase U, V and W exceeds a certain value continuously
(1 trip detection logic)
Shift control actuator assembly (Shift actuator ECU) Does not come on Multi-information Display Error Message 
  • Displayed
Hybrid Control A SAE: P18B5