DTC P0914-2B: Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled [10/2022 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the hybrid vehicle control ECU stores a DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P0914-2B | Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled | When BAT1 voltage is normal, an absolute angle sensor value malfunction continues for a certain amount of time (1 trip detection logic) |
Shift control actuator assembly (shift actuator ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P0915 |