Confirmation Driving Pattern
WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.
Refer to UTILITY [10/2022 - ]
- Turn the ignition switch to ON (READY).
- With the brake pedal depressed, change the shift state from R to D.
- Drive the vehicle at a speed of 40 km/h (25 mph) or more for 10 seconds or more.
- Stop the vehicle, and with the brake pedal depressed, change the shift state from S to N.
- Press the P position switch to change the shift state to P.