LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Service Information) >> RADIATOR (for HEV Model) >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 

    Refer to PROCEDURE - Step 7 [10/2022 - 10/2024] , or refer to PROCEDURE - Step 7 [10/2024 - ]

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 

    Refer to PROCEDURE - Step 8 [10/2022 - 10/2024] , or refer to PROCEDURE - Step 8 [10/2024 - ]

  3. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9 [10/2022 - 10/2024] , or refer to PROCEDURE - Step 9 [10/2024 - ]

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10 [10/2022 - 10/2024] , or refer to PROCEDURE - Step 10 [10/2024 - ]

  5. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 4 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 4 [08/2023 - ]

  6. DRAIN COOLANT (for Inverter) 

    Refer to PROCEDURE - Step 1

  7. REMOVE FRONT BUMPER ASSEMBLY 

    for Sport Package: Refer to PROCEDURE - Step 1

    except Sport Package: Refer to PROCEDURE - Step 1

  8. REMOVE FRONT BUMPER ENERGY ABSORBER 

    for Sport Package: Refer to PROCEDURE - Step 50 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 50 [08/2023 - ]

    except Sport Package: Refer to PROCEDURE - Step 49 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 49 [08/2023 - ]

  9. REMOVE FRONT BUMPER LOWER ABSORBER 

    for Sport Package: Refer to PROCEDURE - Step 54 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 54 [08/2023 - ]

    except Sport Package: Refer to PROCEDURE - Step 53 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 53 [08/2023 - ]

  10. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY 

    for Sport Package: Refer to PROCEDURE - Step 58 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 58 [08/2023 - ]

    except Sport Package: Refer to PROCEDURE - Step 55 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 55 [08/2023 - ]

  11. REMOVE NO. 2 FRONT BUMPER REINFORCEMENT 

    for Sport Package: Refer to PROCEDURE - Step 59 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 59 [08/2023 - ]

    except Sport Package: Refer to PROCEDURE - Step 56 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 56 [08/2023 - ]

  12. REMOVE INLET AIR CLEANER ASSEMBLY 

    Refer to PROCEDURE - Step 4 [10/2022 - 08/2023] , or refer to PROCEDURE - Step 4 [08/2023 - ]

  13. REMOVE RADIATOR SHUTTER ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  14. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL 

    Refer to PROCEDURE - Step 13

  15. DISCONNECT NO. 3 INVERTER COOLING HOSE 
    Refer to PROCEDURE - Step 14
  16. REMOVE THERMISTOR ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  17. REMOVE NO. 1 RADIATOR AIR GUIDE LH 

    Refer to PROCEDURE - Step 16

  18. REMOVE NO. 1 RADIATOR AIR GUIDE RH 

    Refer to PROCEDURE - Step 17

  19. REMOVE HOOD SUPPORT TENSION SPRING 
    Refer to PROCEDURE - Step 3
  20. REMOVE HOOD LOCK CONTROL COVER 

    Refer to PROCEDURE - Step 10

  21. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY 

    Refer to PROCEDURE - Step 11

  22. REMOVE HOOD LOCK CONTROL JUNCTION ASSEMBLY 

    Refer to PROCEDURE - Step 12

  23. REMOVE HOOD LOCK ASSEMBLY LH 

    Refer to PROCEDURE - Step 13

  24. REMOVE HOOD LOCK ASSEMBLY 

    Refer to PROCEDURE - Step 14

  25. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY 
    1. GTY1130227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  26. DISCONNECT NO. 5 WATER BY-PASS HOSE 
    1. GTY1130396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  27. DISCONNECT NO. 6 WATER BY-PASS HOSE 
    1. GTY1130399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  28. DISCONNECT NO. 1 RADIATOR HOSE 
    1. GTY1130511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  29. DISCONNECT NO. 2 RADIATOR HOSE 
    1. GTY1130252Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  30. DISCONNECT NO. 4 INVERTER COOLING HOSE 
    1. GTY1130513Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  31. DISCONNECT NO. 5 INVERTER COOLING HOSE 
    1. GTY1130249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  32. REMOVE RADIATOR ASSEMBLY 
    1. GTY1133594Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the cooling fan motor connector.
      2. Disengage the 2 clamps to disconnect the wire harness from the fan with motor assembly.
      3. Rotate the lever while pushing the lock, and disconnect the cooling fan motor connector.
        NOTE:

        After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.

      4. Disengage the 2 clamps to disconnect the wire harness from the fan with motor assembly.
    2. GTY1132410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the 2 claws.
      2. Disengage the 2 guides to separate the cooler condenser assembly and radiator assembly (for Inverter Coolant) from the radiator assembly.
        NOTE:

        Make sure not to damage the cooler condenser assembly, radiator assembly (for Inverter Coolant) or radiator assembly when separating the cooler condenser assembly and radiator assembly (for Inverter Coolant).

      3. Remove the radiator assembly with the fan with motor assembly from the vehicle body.
        NOTE:

        Do not apply excessive force to the cooler condenser assembly or pipe when removing the radiator assembly with the fan with motor assembly.

    3. GTY1133212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the 2 claws.
      2. Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.
        NOTE:

        Do not damage the radiator assembly when removing the fan with motor assembly.

  33. REMOVE FILLER NECK 
    1. GTY1202599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Retainer - -
      Pull out Pull out
      1. Pull out the retainer to disengage the lock claws and pull off the filler neck.
  34. REMOVE RADIATOR SUPPORT CUSHION 
    1. GTY1078628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  35. REMOVE LOWER RADIATOR SUPPORT 
    1. GTY1078632Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals