Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Flow Shutting Valve Installation Components With Torque Specifications [08/2023 - ] (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	FLOW SHUTTING VALVE (WATER BY-PASS HOSE ASSEMBLY)	16260	See step 1	-	-
2	WIRING HARNESS CLAMP BRACKET	82715	-	-	-

*1	OUTLET HEATER WATER HOSE	*2	INLET HEATER WATER HOSE
*3	NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY	*4	HEATER WATER HOSE
	N.m (kgf/cm, ft.lbf): Specified torque	-	-

Fig 2: Flow Shutting Valve Installation Components With Torque Specifications [08/2023 - ] (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
3	OUTER COWL TOP PANEL SUB-ASSEMBLY	55701J	-	-	-
4	WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY	-	-	-	-
5	HYBRID MOTOR CONTROL INVERTER ASSEMBLY	G92A0

N.m (kgf/cm, ft.lbf): Specified torque

Fig 3: Flow Shutting Valve Installation Components With Torque Specifications [08/2023 - ] (3 Of 3)

Callout - Procedure		Part Name Code
6	ADD ENGINE COOLANT (for Engine)	-	-	See step 6	-
7	INSPECT FOR COOLANT LEAK (for Engine)	-	-	-	See step 7
8	NO. 1 ENGINE UNDER COVER	51441	-	-	-
9	FRONT WHEEL OPENING EXTENSION PAD RH	53851D	-	-	-
10	FRONT WHEEL OPENING EXTENSION PAD LH	53852B	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque