LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> Engine Coolant Temperature Sensor >> Removal [10/2022 - 08/2023] >> Procedure

Removal [10/2022 - 08/2023]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT (for Engine) 

    Refer to REPLACEMENT [10/2022 - 08/2023]

  2. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1

  3. REMOVE INLET AIR CLEANER ASSEMBLY 

    See step  4

  4. REMOVE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR 
    NOTE:

    If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.

    1. GTY1133149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE HYBRID MOTOR CONTROL INVERTER ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    NOTE:

    If the engine coolant temperature sensor has been struck or dropped, replace it.

    1. GTY1066355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002