LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> Camshaft Oil Control Valve >> On-Vehicle Inspection [10/2022 - ] >> Procedure

On-Vehicle Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    HINT: 

    Refer to REMOVAL [10/2022 - 08/2023] , or refer to REMOVAL [08/2023 - ] 

  2. INSPECT CAMSHAFT TIMING VALVE ASSEMBLY 
    1. Check the stroke of the plunger in the center of the camshaft timing valve assembly.
      GTY999542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Plunger

      Standard Stroke

      Specified Condition Result
      2.2 mm or higher
      0.0866 in. or higher
      mm
      in.

      If the result is not as specified, replace the camshaft timing valve assembly.

  3. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    HINT: 

    Refer to INSTALLATION [10/2022 - 08/2023] , or refer to INSTALLATION [08/2023 - ]