Installation [10/2022 - 08/2023]: Procedure
WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CAMSHAFT TIMING VALVE ASSEMBLY
- Temporarily install the camshaft timing valve assembly to the camshaft timing exhaust gear assembly.NOTE:
- If the camshaft timing valve assembly has been struck or dropped, replace it.
- Make sure to fit the protrusion of the camshaft timing valve assembly into the cutout of the camshaft timing exhaust gear assembly.
- Using a 5 mm hexagon socket wrench, install the camshaft timing valve assembly with the bolt.
Torque: 19 N.m (194 kgf/cm, 14 ft.lbf)
- Pull the camshaft timing valve assembly to confirm that is installed securely.
- Temporarily install the camshaft timing valve assembly to the camshaft timing exhaust gear assembly.
- INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to INSTALLATION [10/2022 - 08/2023]