LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Electronic A/T Shift Lever System - Diagnostics - Introduction) >> Electronic Shift Lever System >> How To Proceed With Troubleshooting [10/2022 - ] >> Procedure

How To Proceed With Troubleshooting [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. VEHICLE BROUGHT TO WORKSHOP 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  2

  2. CUSTOMER PROBLEM ANALYSIS 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  3

  3. CONNECT GTS TO THE DLC3* 

    HINT: 

    If the display on the GTS indicates a communication error, inspect the DLC3.

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  4

  4. CHECK DTC AND SAVE FREEZE FRAME DATA* 
    1. Check DTC

      Powertrain > Transmission > Trouble Codes 

    2. Check and save freeze frame data

      Refer to FREEZE FRAME DATA [10/2022 - ] 

      HINT: 

      Result

      Result Proceed to
      DTCs are output A
      DTCs are not output B

    Result: 

    B 

    PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [10/2022 - 08/2023]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2023 - ]  

    Result: 

    A 

    See step  5

  5. CLEAR DTC AND FREEZE FRAME DATA* 

    Powertrain > Transmission > Clear DTCs 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  6

  6. CONDUCT VISUAL INSPECTION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  7

  7. CONFIRM PROBLEM SYMPTOMS 

    Result

    Result Proceed to
    Malfunction does not occur A
    Malfunction occurs B

    Result: 

    B 

    See step  10

    Result: 

    A 

    See step  8

  8. DUPLICATE CONDITIONS THAT PRODUCE SYMPTOMS 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  9

  9. CHECK FOR DTC* 

    Powertrain > Transmission > Trouble Codes 

    Result

    Result Proceed to
    DTCs are not output A
    DTCs are output B

    Result: 

    B 

    See step  17

    Result: 

    A 

    See step  10

  10. CONDUCT BASIC INSPECTION 

    Result

    Result Proceed to
    Malfunctioning parts not confirmed A
    Malfunctioning parts confirmed B

    Result: 

    B 

    See step  18

    Result: 

    A 

    See step  11

  11. CHECK ECU POWER SOURCE CIRCUIT 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  12

  12. CONFIRM CIRCUITS INDICATED BY OUTPUT DTCS 

    Result

    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B

    Result: 

    B 

    See step  14

    Result: 

    A 

    See step  13

  13. CHECK FOR INTERMITTENT PROBLEMS 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ]

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  14

  14. IDENTIFY PROBLEM 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  15

  15. ADJUST AND/OR REPAIR 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  16

  16. CONDUCT CONFIRMATION TEST 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

  17. REFER TO DTC CHART 

    Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2023 - ] 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  12

  18. CONDUCT PARTS INSPECTION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  14

scientia non olet · About LEMON Manuals