LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Intake / Exhaust System - Service Information) >> Exhaust Pipe >> Removal [10/2022 - 08/2023] >> Procedure

Removal [10/2022 - 08/2023]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY 
    WARNING:
    • To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
    1. GTY1129968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR FUEL RATIO SENSOR (for Sensor 2) 

    Refer to REMOVAL [10/2022 - 08/2023]

  3. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 4

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) 
    WARNING:
    • To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
    1. GTY1132227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1129826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002