Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Exhaust Pipe Installation Components With Torque Specifications [08/2023 - ] (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	FRONT EXHAUST PIPE ASSEMBLY	17410	See step 1	-	-

*A	for PHEV Model	*B	for HEV Model
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part

Fig 2: Exhaust Pipe Installation Components [08/2023 - ] (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
2	AIR FUEL RATIO SENSOR (for Sensor 2)	89467C	-	-	-

Fig 3: Exhaust Pipe Installation Components With Torque Specifications [08/2023 - ] (3 Of 3)

Callout - Procedure		Part Name Code
3	TAIL EXHAUST PIPE ASSEMBLY	17430	-	-	-
4	ADD ENGINE COOLANT (for Engine)	-	-	See step 4	-
5	INSPECT FOR COOLANT LEAK (for Engine)	-	-	-	See step 5
6	INSPECT FOR EXHAUST GAS LEAK	-	-	-	See step 6

*A	for PHEV Model	*B	for HEV Model
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part