LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Fuel System - Service Information (2 Of 2)) >> Fuel Pump Ecu >> Removal [10/2022 - 08/2023] >> Procedure

Removal [10/2022 - 08/2023]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR SEAT ASSEMBLY 

    Refer to REMOVAL [10/2022 - 08/2023]

  2. REMOVE REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 20

  3. REMOVE NO. 3 BATTERY SERVICE COVER BOARD 

    Refer to PROCEDURE - Step 21

  4. REMOVE REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 40

  5. REMOVE FUEL PUMP CONTROL ECU 
    1. GTY1130510Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the 2 fuel pump control ECU connectors.
      2. Remove the bolt and fuel pump control ECU from the vehicle body.
        NOTE:

        Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

  6. REMOVE FUEL PUMP CONTROL ECU BRACKET 
    1. GTY1130882Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals