Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

for Type A:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Tube

for Type B:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Tube

COMPONENTS (DISASSEMBLY)

Fig 1: Fuel Pump (For PHEV Model) Disassembly Components

Procedure		Part Name Code
1	FUEL SENDER GAUGE ASSEMBLY	83320	See step 1	-	-
2	FUEL PUMP HARNESS	77785	-	-	-
3	FUEL SUB-TANK SUB-ASSEMBLY	-	-	-	-
4	NO. 2 FUEL SUCTION SUPPORT	77175	-	-	-
5	FUEL PUMP	23221	-	-	-

*A	for Type A	*B	for Type B
*1	FUEL PUMP SPACER	-	-
•	Non-reusable part	-	-